RGS Eyebolt
Always the perfect choice.
This high-strength RGS eyebolt is ideal for lifting machine parts. Eyebolts may only be tightened manually and are not suitable for diagonal pull. However, they cannot be beaten when it comes to quality.
Permitted usage
For load capacities in the permitted directions of pull (fig.: Permitted usage) please refer to the load capacity table.
Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:
Permitted usage
For load capacities in the permitted directions of pull (fig.: Permitted usage) please refer to the load capacity table.
Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:
- Direction of pull is obstructed
- Direction of pull is not within the indicated area (fig.: Non-permitted usage)
3D views
Specification table
| RGS Eyebolt | Code / Type | thread [mm] |
load capacity 1-leg 0° [kg] |
load capacity 2-leg 0° [kg] |
a [mm] |
b [mm] |
c [mm] |
d [mm] |
e [mm] |
weight [kg/pc.] |
|---|---|---|---|---|---|---|---|---|---|---|
 |
RGS 8 | M8 | 400 | 800 | 34 | 7 | 20 | 24 | 44 | 0.05 | RGS 10 | M10 | 700 | 1,400 | 38 | 8 | 22 | 30 | 49 | 0.10 | RGS 12 | M12 | 1,000 | 2,000 | 47 | 10 | 26 | 36 | 59 | 0.14 | RGS 14 | M14 | 1,200 | 2,400 | 57 | 14 | 29 | 40 | 71 | 0.25 | RGS 16 | M16 | 1,500 | 3,000 | 65 | 14 | 35 | 55 | 79 | 0.36 | RGS 18 | M18 | 2,000 | 4,000 | 65 | 14 | 35 | 54 | 79 | 0.38 | RGS 20 | M20 | 2,500 | 5,000 | 73 | 16 | 39 | 59 | 89 | 0.55 | RGS 22 | M22 | 3,000 | 6,000 | 82 | 19 | 44 | 64 | 101 | 0.74 | RGS 24 | M24 | 4,000 | 8,000 | 95 | 20 | 54 | 84 | 114 | 1.12 |
| Safety factor 4 Additional size available upon request! Important: Subject to technical changes! |
||||||||||
Downloads
RGS 10 |
|
|
|
RGS 12 |
|
|
|
RGS 14 |
|
|
|
RGS 16 |
|
|
|
RGS 18 |
|
|
|
RGS 20 |
|
|
|
RGS 22 |
|
|
|
RGS 24 |
|
|
|
RGS 8 |
|
|
|