Single lashing straps
with cam buckle
according EN 12195-2
pewag lashing straps are manufactured according to EN 12195-2 and consist of polyester (PES).
We distinguish between single lashing belts and two part lashing straps:
A single lashing strap is used for strapping and therefore does not need end fittings.
A two part lashing strap consists of a fixed end (end fitting, belt and tension device) and a loose end (belt and end fitting).
We distinguish between single lashing belts and two part lashing straps:
A single lashing strap is used for strapping and therefore does not need end fittings.
A two part lashing strap consists of a fixed end (end fitting, belt and tension device) and a loose end (belt and end fitting).
Lashing straps must not be used for lifting loads, only for securing of load.
Specification table
| SAP item number | EAN | designation | STF Standard tension force [daN] |
Allowed lashing capacity of the lashing strap LC | Total length [m] |
signal color | tie-width [mm] |
Content |
|---|---|---|---|---|---|---|---|---|
| 7002477 | 9002546914910 | ZG KL 25 x 2500 / 250 E | - | 250 daN | 2,500 | red | 25 | 2 |
| 7002478 | 9002546914927 | ZG KL 25 x 3000 / 250 E | - | 250 daN | 3,000 | red | 25 | 2 |
| 7001173 | 9002546699374 | ZG KL 25 x 5000 / 250 E | - | 250 daN | 5,000 | red | 25 | 2 |