Two part lashing straps
with ratchet and PVC coated s-hook
according EN 12195-2
pewag lashing straps are manufactured according to EN 12195-2 and consist of polyester (PES).
We distinguish between single lashing belts and two part lashing straps:
A single lashing strap (E) is used for strapping and therefore does not need end fittings.
A two part lashing strap (Z) consists of a fixed end (end fitting, belt and tension device) and a loose end (belt and end fitting).
We distinguish between single lashing belts and two part lashing straps:
A single lashing strap (E) is used for strapping and therefore does not need end fittings.
A two part lashing strap (Z) consists of a fixed end (end fitting, belt and tension device) and a loose end (belt and end fitting).
End fittings:
RH = round hook
DHS = triangle ring with eye
Lashing straps must not be used for lifting loads, only for securing of load.
Specification table
| SAP item number | EAN | designation | STF Standard tension force [daN] |
Allowed lashing capacity of the lashing strap LC | Total length [m] |
signal color | tie-width [mm] |
Content |
|---|---|---|---|---|---|---|---|---|
| 7002495 | 9002546919212 | ZG 25 x 4000 / 250 Z ZSH | - | 250 daN | 4,000 | red | 25 | 1 |
| 7002480 | 9002546914941 | ZG 25 x 6000 / 250 Z ZSH | - | 250 daN | 6,000 | red | 25 | 1 |