Lashing strap retractable
with ratchet and double hook
according EN 12195-2
pewag lashing straps are manufactured according to EN 12195-2 and consist of polyester (PES).
We distinguish between single lashing belts and two part lashing straps:
A single lashing strap is used for strapping and therefore does not need end fittings.
A two part lashing strap consists of a fixed end (end fitting, belt and tension device) and a loose end (belt and end fitting).
We distinguish between single lashing belts and two part lashing straps:
A single lashing strap is used for strapping and therefore does not need end fittings.
A two part lashing strap consists of a fixed end (end fitting, belt and tension device) and a loose end (belt and end fitting).
Lashing straps must not be used for lifting loads, only for securing of load.
Tabla de especificaciones
| SAP item number | EAN13 | designation | Fueza de tensión estándar [daN] |
Allowed lashing capacity of the lashing strap LC | Total length | signal color | tie-width [mm] |
Content |
|---|---|---|---|---|---|---|---|---|
| 7001094 | 9002546518569 | ZG ROLL 25 X 3000 / 300 Z RH | 30 daN | 300 daN | 3.000 | black | 25 | 1 |
| 7001095 | 9002546518576 | ZG ROLL 50 X 3000 / 750 Z RH | 75 daN | 750 daN | 3.000 | black | 50 | 1 |