Single lashing straps
with ratchet
according EN 12195-2
We distinguish between single lashing belts and two part lashing straps:
A single lashing strap is used for strapping and therefore does not need end fittings.
A two part lashing strap consists of a fixed end (end fitting, belt and tension device) and a loose end (belt and end fitting).
Lashing straps must not be used for lifting loads, only for securing of load.
Tabla de especificaciones
SAP item number | EAN13 | designation | Fueza de tensión estándar [daN] |
Allowed lashing capacity of the lashing strap LC | Total length | signal color | tie-width [mm] |
Content |
---|---|---|---|---|---|---|---|---|
7002479 | 9002546914934 | ZG 25 x 4000 / 250 E | - | 250 daN | 4.000 | blue | 25 | 1 |
7001174 | 9002546699398 | ZG 25 x 5000 / 250 E | - | 250 daN | 5.000 | blue | 25 | 1 |
7002474 | 9002546914880 | ZG 25 x 6000 / 250 E | - | 250 daN | 6.000 | red | 25 | 1 |
7002475 | 9002546914897 | ZG 35 x 6000 / 1000 E | 280 daN | 1000 daN | 6.000 | green | 35 | 1 |
7002476 | 9002546914903 | ZG 35 x 8000 / 1000 E | 280 daN | 1000 daN | 8.000 | green | 35 | 1 |
7002485 | 9002546914996 | ZG 50 x 8000 / 2000 E | 360 daN | 2000 daN | 8.000 | blue | 50 | 1 |
7002484 | 9002546914989 | ZG 50 x 8000 / 2500 E | 350 daN | 2500 daN | 8.000 | blue | 50 | 1 |